37 hp 999cc Kohler Engine CH1000-3000 Command Pro Basic Heavy Duty Air Cleaner, 1 7/16 Crankshaft, Free Shipping, No Tax.
Replaces Old Kohler Spec PA, PS # CH1000-0002, CH1000-2002.
Engine is pictured with optional engine control mounted. Key Switch, Panel, Oil Sentry Light, Decal, Knobs, Brackets, and Screws
(Order controls separately).
Standard Features:
- Overhead Valve Design
- Hydraulic Valve Lifters
- Metal Cam
- Cast-iron Cylinder Liners
- Stellite Exhaust Valves
- Flywheel and PTO Sleeve Bearing
- Electronic Ignition
- High-Performance Spark Plugs RFI and EMC Compliant
- Full Pressure Lubrication
- Top Mounted Spin On Large Capacity Oil Filter
- Large Dual Oil Drains
- Heavy-Duty Canister Air Cleaner System
- High-efficiency Fan and Screen
- Fixed Grass Screen and Guard
- Blower Housing with Removable Cylinder Access Covers
- Easy Access Valve Covers
- Oil Sentry
- Solenoid Shift Starter (looking at the front of engine, starter is mounted on the right side)
- Two Barrel Carburetor
- Fuel Shut Down Solenoid
- Smart Choke Carburetor
- Mechanical Fuel Pump
- 25 Amp Alternator
- Hardened Crank Shaft Journals
- User-friendly Maintenance
- 3yr Limited Warranty
- Remote Controls (for front mounted controls and key order kit below)
- Crankshaft-1.437" (1 7/16")(36 mm) Diameter x 4.453" (113 mm) PTO Length, 0.375" (9.5 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF Thread
- PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep, 7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
- 7" (178 mm) Diameter Pilot
Optional Accessories:
6237602S Engine Mounted Control Kit (Includes Key Switch, Panel, Oil Sentry Light, Decal, Knobs, Brackets, and Screws)
6278601S Exhaust Muffler Kit Center Outlet (Discharges straight out the back if facing the front of engine).
6278602S Exhaust Muffler Kit Starter Side Outlet (Discharges to the right if facing the front of engine).
6278603S Exhaust Muffler Kit Opposite Starter Side (Discharges to the left if facing the front of engine).
MAX. POWER @ 3600 RPM hp (kW) 37 (27.5)
DISPLACEMENT cu. in. (cc) 61 (999)
BORE in. (mm) 3.5 (90)
STROKE in. (mm) 3.1 (78.5)
PEAK TORQUE @ MAXIMUM 57.4 ft lbs. (77.8 Nm) @ 3200
COMPRESSION RATIO 8.8:1
DRY WEIGHT lbs. (kg) 132 (59)
OIL CAPACITY U.S. quarts (liters) 2.9 (2.75)
DIMENSIONS L x W x H in. 15.3 x 19.0 x 27.5
Engine Type:
4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block
| J1940 Power hp(kW) 1 |
37 (27.6) |
| Displacement cu in (cc) |
61 (999) |
| Bore in (mm) |
3.5 (90) |
| Stroke in (mm) |
3.1 (78.5) |
| Peak Torque lbs. ft (Nm) |
55.3 (75) |
| Compression Ratio |
8.8:1 |
| Dry Weight lbs (kg) |
132 (59) |
| Oil Capacity U.S. quarts (L) |
2.1 (2) |
| Lubrication |
Full pressure w/full-flow filter |
| Dimensions L x W x H in |
15.3 x 19.0 x 27.5 |
| Backpressure Limit 2 |
40 |
* Length is front to rear of engine. Width is valve cover to valve cover. Height is mounting surface to top of air cleaner.
1 Power (hp) and Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.
- Model: PACH1000-3000
- UPC: 885612417190
- Shipping Weight: 168lbs
- Manufactured by: Kohler
