Kohler Engine CH730-3015 23.5 hp Command Pro 725cc Basic W/ Panel & Key LP

Name: Kohler Engine CH730-3015 23.5 hp Command Pro 725cc Basic W/ Panel & Key LP
Brand: Kohler
Price: 3878 USD
Availability: InStock

$3878.00

Add Qty:

Description

21.5 hp CH730-3015 KOHLER COMMAND BASIC W/PANEL & KEY LP

Replaces CH20S 64570, CH640-3003

Kohler parts lookup for spec # 64570
Kohler parts lookup for spec # CH640-3003
Kohler parts lookup for spec # CH730-3015

Standard Command PRO Features:
High Efficiency Overhead Valve Design
Zero Maintenance Hydraulic Valvetrain
Cast-Iron Cylinder Liners
High Efficiency, Low-Noise Cooling Fan
Full Pressure Lubrication System to all Bearings
Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
Variable Speed Governor
Easy-to-Identify Yellow Oil Service Points for Valve Cover
Oil Fill and Dipstick
International Emissions Certifications
3 year Unlimited Hour Commercial Warranty

Model Features:
Designed to operate on Liquid Propane (LP) Fuel
Drop-in-Place Design
· Engine-Mounted Propane Fuel Pressure Regulator
· Engine-Mounted Propane Fuel Vaporizer for Liquid Withdrawal
· Engine-Mounted 12V Fuel Shutoff Solenoid
Kohler Low Profile, Dual-Element Air Cleaner System
Easy Start with Digital Spark Advance Ignition and High Torque Solenoid Shift Starter
Engine-Mounted Keyswitch and Engine Controls
20 Amp Regulated Charging System
RFI Compliance
Low Oil Pressure Sentry Protection
Includes Quiet PTO Canister Muffler with Starter Side Outlet
3750 rpm high idle setting, 1200 rpm low idle setting

Spec-Specific Features:
Crankshaft PTO
· 1.0" (25.4 mm) Diameter x 2.992" (76 mm) PTO Length
· 0.250" (6 mm) Keyway
· Drilled and Tapped 1.0" (38 mm) Deep, 3/8-24 UNF-2B
PTO Mounting Face
· 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
· 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
· 7.00" (178 mm) Pilot Diameter
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)

Specs

Spec-Specific Features:
Crankshaft PTO
· 1.0" (25.4 mm) Diameter x 2.992" (76 mm) PTO Length
· 0.250" (6 mm) Keyway
· Drilled and Tapped 1.0" (38 mm) Deep, 3/8-24 UNF-2B
PTO Mounting Face
· 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
· 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
· 7.00" (178 mm) Pilot Diameter
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)

Engine Type:

4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block

Model	Command PRO CH730LP
J1940 Power hp(kW) ¹	21.5 (16)
Displacement cu in (cc)	44 (725)
Bore in (mm)	3.3 (83)
Stroke in (mm)	2.6 (67)
Peak Torque lbs. ft (Nm)	34 (46.1)
Compression Ratio	9.0:1
Dry Weight lbs (kg)	108 (49)
Oil Capacity U.S. quarts (L)	2 (1.9)
Lubrication	Full pressure w/full-flow filter
Dimensions L x W x H in	14 x 17.7 x 19
Backpressure Limit ²	50
J1995 Power hp (kW) ³	20.4 (15.2)
J1995 Rated Speed (RPM)	3600

* Length is grass screen to PTO mounting face. Width is spark plug to spark plug. Height is top of air cleaner to mounting feet.

¹ Power (hp) and Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

² Inches of H₂0 @ 3600 RPM WOT

³ J1995 power and torque certified by 3rd Party Witness

Model: PACH730-3015
UPC: 885612032461
Shipping Weight: 120lbs
Manufactured by: Kohler